FREYARA LASER FacialPure LS006, Home-Use Cordless Picosecond Laser Pen, Suitable for Removing Freckles, Erase Tattoos, Dark Spots and Fading Pigmentation

1. Fade Moles, Spots & Tattoos at Home:Targets freckles, age spots, moles, and unwanted tattoos with precision picosecond laser. No more clinic appointments,just treat problem areas in private, on your own schedule.

2. 9 Speeds and 4 Intensities for Total Control:9 speed settings (fast to slow) + 4 energy levels (gentle to strong). Start low for facial spots, go higher for stubborn ink or deep moles. Adjust until it feels right for your skin.

3. Built-In Safety- Position First, Then Fire:Press the positioning button to see exactly where the laser will hit with a visible guide light. Only then press the fire button,no guessing, no accidental exposure.

4. Picosecond Precision:Laser pulses fast enough to shatter pigment into dust your body naturally flushes out. 440-460nm wavelength targets melanin directly, leaving surrounding skin untouched.

5. Cordless & Long-Lasting:2000mAh rechargeable battery lasts through multiple sessions,no cords tangling you up. Weighs just 222g, fits in one hand, and charges via USB-C.

How to use?

TIP:When using this product for the first time,suggest to find something with color topractice(for example black spots on fruit or paper,etc.) After being proficient in the operation specifications, you can operate on your body. Recommended to start from the arm and finally operate on the face or other parts. For the first time, it must be used from the lowest gear, and the gear can be gradually increased according to your actual conditions. Each person's skin sensitivity is different. Please do not rashly increase the gear.

1. Wear protective goggles.

2. Press and hold the "Power On" button for 2 seconds to turn on the machine.

3. Briefly press the "Laser Intensity Adjustment" button to select the intensity.

4. Briefly press the "Laser Speed" button to select the laser emission speed.

5. Press the "Positioning" button; the laser output will emit a guide light to locate the skin treatment area. Do not release the button. Then press the "Emit" button to output the laser.

Note: The laser will only emit when both the "Positioning" and "Emit" buttons are pressed simultaneously. Anesthetic should be applied to the skin treatment area before laser treatment.

6. After the operation, press and hold the "Power Off" button for 2 seconds to turn off the machine. If the "Positioning" and "Emit" buttons are not pressed within 5 minutes while the machine is on, it will automatically shut down.

CAUTION

1. Children and the elderly are prohibited from using this product.

2. Individuals with photosensitive skin or currently using photosensitive medications are prohibited from using this product.

3. Users of implanted life support devices such as pacemakers are prohibited from using this product.

4. Pregnant women, women attempting pregnancy, and breastfeeding women are not advised to use this product.

5. Do not point the instrument's output towards the eyes or other vulnerable areas. Wear safety goggles during use.

6. Even when wearing safety goggles, do not look directly at the light emitted from or reflected from the lamp head's output.

7. Do not operate the instrument in flammable or explosive environments.

8. Ensure good ventilation in the room.

9. Operate the instrument away from children. After use, store it out of reach of children.

10. Individual skin sensitivity varies; some individuals may develop blisters during use. This is normal and will not cause any problems. The blister fluid mainly consists of electrolytes, glucose, and fibrin. The blister skin is a good protective film and is best allowed to be absorbed naturally without treatment. For large blisters, use a sterilized acne needle to puncture and drain the fluid, then apply a professional ointment. Do not touch the blisters to prevent infection.

11. After treatment, the treated area will scab over. Avoid spicy foods and alcohol until the scabs fall off naturally.

12. Do not get the area wet for 24 hours after treatment. Gently wipe with a warm towel for the first three days.

13. Protect the area from sun exposure after treatment; avoid prolonged exposure to direct sunlight.

Specifications:

Rated Voltage:DC5V

Working Frequency:1-9HZ

Gear Level:1-4gear

Wavelength:440nm-460nm

Battery capacity: 2000mAh

Rated Power:<8W

Product Material:ABS+STAINLESS STEEL

Product Size:21*4.1*3.7CM

Product Weight:222g

Packaging Size:24.6*13.6*4.7CM

Packaging Weight:1100G

Packing List:

Picosecond Pen*1

USB Cord*1

Goggles*1

Instruction Manual*1